Mechanical Production of Nanoparticles in Stirred Media Mills

Mechanical Production of Nanoparticles in Stirred Media Mills
Author :
Publisher : Cuvillier Verlag
Total Pages : 210
Release : 2007-06-13
ISBN 10 : 9783736922556
ISBN 13 : 3736922558
Language : EN, FR, DE, ES & NL

Mechanical Production of Nanoparticles in Stirred Media Mills Book Description:

Nanotechnology applications in the pharmaceutical, materials, and chemical industries has renewed interest in the use of wet grinding in stirred media mills for the production of nanoparticles with controlled microstructure. Quite recently it is possible to mill particles down to the size range of 10 nm. However, challenges arise in the production of sub-micron particles that are, in part, due to colloidal surface forces influencing slurry stability and rheology. In this work experiments are performed on a well characterized model system of monodisperse primary nanoparticles that are salt destabilized and aggregated under various milling conditions. Perikinetic and orthokinetic aggregation are measured, with the latter in a laminar shear flow as well as in a stirred media mill, to examine the effects of colloidal stability and flow on the aggregation process. The agglomeration kinetics are measured using dynamic light scattering (DLS) as a function of electrolyte concentrations. Further information on the agglomeration process and the structure of the agglomerates are also obtained from small angle neutron scattering (SANS) and rheo-optical light scattering (ROA) experiments both at rest and under flow. Theoretical predictions for the colloidal stability from independently measured particle and solution properties compare well with the experimental results. Orthokinetic aggregation is observed to result in faster aggregation and denser agglomerates. Because of the high industrial demand for nanoparticles in organic media the study was extended to non-aqueous systems. Electrostatic stabilization requires a sufficiently high surface charge leading to a steeply decaying surface potential. These conditions can be met by solvents of medium dielectric constant (i.e. values larger than about 15-20), e.g. alcohols. In these media the particles may carry a high surface charge and the solubility of salts will be sufficient to enable a high repulsive barrier. It is shown that stable suspensions with high ζ-potentials can be achieved for alumina in ethanol with elecrostatic stabilization. Milling studies with electrostatic stabilization showed that the size of the primary particles is conspicuously smaller than the size of the particles milled under the same conditions in the aqueous phase. However, the media wear has a negative influence on the stability of the suspension since the ionic strengths in organic solvents are much lower. Milling experiments with steric stabilization in organic solvents produced larger primary particle sizes than with electrostatic conditions. The polymer layer around the particles seems to adsorb part of the grinding energy during the impact of two grinding beads and cushions the comminution. However, media wear has in contrast to the electrostatic stabilized particles in organic solvents no influence on the stability of the suspension. An important question is whether the mechano-chemical activation which was observed in aqueous media is crucial to obtain nanoparticles. Differential Scanning Calorimetry (DSC) and X-ray diffraction (XRD) measurements showed no mechano-chemical changes during milling in ethanol and toluene. In the aqueous phase the stabilization mechanism has no influence on the amount of hydroxide phase. A protecting polymer cover around the particles does not prevent the mechano-chemical changes.


RELATED BOOKS:
Mechanical Production of Nanoparticles in Stirred Media Mills
Language: en
Pages: 210
Authors:
Categories: Technology & Engineering
Type: BOOK - Published: 2007-06-13 - Publisher: Cuvillier Verlag

Nanotechnology applications in the pharmaceutical, materials, and chemical industries has renewed interest in the use of wet grinding in stirred media mills for the production of nanoparticles with controlled microstructure. Quite recently it is possible to mill particles down to the size range of 10 nm. However, challenges arise in
Shakespeare, Not Stirred
Language: en
Pages: 160
Authors: Caroline Bicks, Michelle Ephraim
Categories: Cooking
Type: BOOK - Published: 2015-09-01 - Publisher: Penguin

In Shakespeare, Not Stirred, two professors mix equal parts booze and Bard to help you through your everyday dramas. It’s like having Shakespeare right there in your living room, downing a great drink and putting your crappy day in perspective. So get out your cocktail shaker and lend him your
Shaken and Stirred
Language: en
Pages: 240
Authors: William L. Hamilton
Categories: Cooking
Type: BOOK - Published: 2009-03-17 - Publisher: Zondervan

William L. Hamilton loves a good gimlet. Rose's and lime. Straight up. Perfectly iced. Make the glass pretty too. "It ruined my reputation for thinking before I speak," he writes of that love. "I accept the trade-off." Like Lewis Carroll's Alice, when Hamilton sees it, he drinks it -- and
Numerical Characterization of Mechanical Stress and Flow Patterns in Stirred Tank Bioreactors
Language: en
Pages: 146
Authors: Manely Eslahpazir Esfandabadi
Categories: Technology & Engineering
Type: BOOK - Published: 2013-06-24 - Publisher: Cuvillier Verlag

Das Ziel der Arbeit bestand darin, die lokalen und globalen mechanischen Beanspruchungsparameter in einem Rührkesselbioreaktor mit Hilfe der numerischen Strömungssimulation (CFD) nachzubilden und die Ergebnisse mit experimentellen Daten der Pellet-kultivierung bzgl. Fluiddynamik und Rheolgie des rekombinanten Stammes A. niger SKAn1015 zu validieren. Ausgehend von der einphasigen Strömungssimulation eines 2L-Bioreaktors werden
Mode-stirred Method Implementation for HIRF Susceptibility Testing and Results Comparison with Anechoic Method
Language: en
Pages: 16
Authors: Truong X. Nguyen
Categories: Anechoic chambers
Type: BOOK - Published: 2001 - Publisher:

This paper describes the implementation of mode-stirred method for susceptibility testing according to the current DO-160D standard. Test results on an Engine Data Processor using the implemented procedure and the comparisons with the standard anechoic test results are presented. The comparison experimentally shows that the susceptibility thresholds found in mode-stirred